info@hardballchemical.com
Home   What's New   User Comments | Who We Are | Products | MSDS | Technical Support  | Contact Us
Power Powder Rinsifier
Power Powder has been designed specifically to work in synergy with the action of Pow-R-Pak Pre-Spray. The 2 products in tandem action create a synergistic action (1 + 1 = 3) that is extremely productive on the most difficult cleaning jobs that will be encountered.
  • Power Powder has a pH of 8.0 to 8.5, but it works as a low pH product. The formula contains acceleration elements that produce extremely active chemical reactions when water is added to the equation. The range of pH is because Power Powder will react to your local water situation, and change pH, ever so slightly, based on local water conditions.

  • Power Powder is safe for use on all fabrics, and is extremely active toward added coloring agents in fabrics, such as rust, plant spots, etc. Contains color brightening, agents that are a result of it's component parts, and NOT because of the addition of artificial color brighteners.

  • Power Powder is a cleaning-rinsing agent that is non-residual, non-allergenic, and attacks both oil based and protein based soiling.

  • We call it a rinsifier to indicate it's unique position in the cleaning cycle. We believe that the use of total acid rinses is counter-productive to your cleaning effort. Why? Because total acid rinses immediately and completely STOP the "cleaning" action. You are, at this point in the cycle, ready to remove suspended soils and residual soiling. Pure acid rinses will stop the cleaning action of your cleaning chemicals right at the critical removal time of the suspended soil load. Power Powder has the ability to complete the soil removal process without inhibiting the cleaning action AND then leave the fabric in an acid rinse state. Superior Cleaning Action. Superior Finished Product.

  • Concentrated formula should NOT be over-used.

    • Dilution Rates When Using Pow-R-Pak Pre-Spray: Portable Extractor - 1 Oz. per 5 gallons of water. For truck mount chemical jugs: 10 Oz. per 5 gallons of water. Meter at 3-5.

    • Dilution rates when NOT using Pow-R-Pak Pre-Spray: Portable Extractor - 1 Oz. per 5 gallons of water. Truck Mount chemical jug: 12 - 16 Oz. per 5 gallon of water in jug. Again meter at 3 - 5.

  • Mixes well in any water temperature, but hot water is better.

  • Very economical to use. Used by itself as a stand-alone product, you will be able to clean all day for slightly more than $6.00 chemical cost. When used with Pow-R-Pak, your combined chemical cost for cleaning all day will be approximately $7.00.

Economical Productive Power that Performs! ! !

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

Home   What's New   User Comments | Who We Are | Products | MSDS | Technical Support | Contact Us